Lever-Operated Control Needle Valves

The control needle valves are used as fluid flow regulators.
The provision of smooth control within the limits of the rated throughput capability is achieved with the help of the valve needle form. The seat has reinforced hard-facing of increased hardness which is resistant to erosive and corrosive wear.
They are not used as shutoff devices.

Designation	DN, mm	PN, MPa	Body Material, Steel	Weight without Electric Actuator, kg
9с-5-1	10	10	20	3,8
9с-5-1-2	10	10	20	3,8
9с-5-2	20	10	20	6,2
9с-5-2-2	20	10	20	6,2
9с-5-2-2М	20	25	20	6,8
9с-4-2	32	10	20	7,2
1193-32-Р	32	25*	12Х1МФ	32,0
815-40-Pв	40	25*	12Х1МФ	19,5
815-40-Pв-01	40	15,7*	12Х1МФ	19,5
1195-50-P	50	13,7*	12Х1МФ	34,1
811-50-Pв	50	13,7*	12Х1МФ	18,0
9с-3-3-2	50	6,3	20	7,7
9с-3-3-4	50	6,3	20	7,7
814-50-Ра	50	37,3*	20	19,7
814-50-Ра-01	50	37,3*	20	19,7
814-50-Ра-02	50	37,3*	20	19,7
814-50-Ра-03	50	37,3*	20	19,7
814-50-Ра-04	50	37,3*	20	19,7
814-50-Ра-05	50	37,3*	20	19,7
808-65-Pв	65	9,8*	12Х1МФ	21,4
808-65-Pв-01	65	9,8*	12Х1МФ	21,4
9с-5-5-2	65	25	20	40,0
1197-65-P	65	9,8*	12Х1МФ	40,0
1198-65-P	65	23,5*	20	40,0

Designation	DN, mm	PN, MPa	Body Material, Steel	Weight without Electric Actuator, kg
9с-5-1	10	10	20	3,8
9с-5-1-2	10	10	20	3,8
9с-5-2	20	10	20	6,2
9с-5-2-2	20	10	20	6,2
9с-5-2-2М	20	25	20	6,8
9с-4-2	32	10	20	7,2
1193-32-Р	32	25*	12Х1МФ	32,0
815-40-Pв	40	25*	12Х1МФ	19,5
815-40-Pв-01	40	15,7*	12Х1МФ	19,5
1195-50-P	50	13,7*	12Х1МФ	34,1
811-50-Pв	50	13,7*	12Х1МФ	18,0
9с-3-3-2	50	6,3	20	7,7
9с-3-3-4	50	6,3	20	7,7
814-50-Ра	50	37,3*	20	19,7
814-50-Ра-01	50	37,3*	20	19,7
814-50-Ра-02	50	37,3*	20	19,7
814-50-Ра-03	50	37,3*	20	19,7
814-50-Ра-04	50	37,3*	20	19,7
814-50-Ра-05	50	37,3*	20	19,7
808-65-Pв	65	9,8*	12Х1МФ	21,4
808-65-Pв-01	65	9,8*	12Х1МФ	21,4
9с-5-5-2	65	25	20	40,0
1197-65-P	65	9,8*	12Х1МФ	40,0
1198-65-P	65	23,5*	20	40,0